2.4 KiB
2.4 KiB
Changelog
Unreleased
- No more crashes or hangs on reconnects: a device that connects twice, or drops off in the middle of pairing, no longer crashes the add-on; a lock-up under load is fixed. An unexpected error ends only that one device's connection; the others carry on.
- A heat pump or wallbox that loses the grid operator's limit (it reports another limit than the one passed on) gets it again.
- A device back online gets the current limit at once.
- The grid operator's control box is never disconnected over the add-on's own errors.
- A binding a device refused is asked for again, waiting longer each time (30 s up to 10 min), so control resumes without a restart.
- Declares to the grid operator's control box only what is known: the heat pumps' and wallboxes' reported power, else the rating you enter on a device's page. Unknown: nothing is declared and the grid operator's use case (LPC) is not offered; the page says why. No more 32 kW, 6 kW per heat pump or 16 A x 3 per wallbox stood in for an unknown power.
- The failsafe limit and time are the control box's own; until it sent them §14a's 4.2 kW for the use case's shortest 2 hours.
0.1.x
- First version (experimental, not yet tried with real devices): pairs with EEBUS devices on your network on the add-on's page, after you compare their SKI: the grid operator's control box (§14a), heat pumps (Vaillant aroTHERM, Viessmann Vitocal, Bosch Compress and others), wallboxes and inverters.
- Shows each paired device in Home Assistant in the area "Cantabile": power and energy (kWh), the heat pump's power limit, the wallbox's car, charging power, energy and current limit, an inverter's solar and battery, the grid connection point.
- The grid operator's limit: shown on the page, passed on to the heat pumps and wallboxes at once and handed to the Cantabile agent, which plans within it. It can't be lifted from Home Assistant.
- Every control starts protected: Cantabile never sets a heat pump to 0 W or a wallbox to 0 A unless you lift that on the page.
- Your consent to control in the add-on's configuration; without it the add-on only reads.
- A simulator (option "Simulate") with a control box, a heat pump and a wallbox to try it without devices.
- The page in English or German, light or dark as Home Assistant.
© 2026 Setti Solutions S.R.L, www.setti.md. All rights reserved.